Skip to content
Same-day dispatch on orders before 2pm AEST · Australia-wide
Mon–Thu 8–4 · Fri 8–3 info@thorair.com.au 1300 263 551
Calculator

Dehumidifier size calculator

Enter the affected area and how wet it is. The result is a starting capacity in litres a day and the matching Thorair LGR units.

Classes follow the IICRC S500 approach. The divisor is the common LGR starting factor for each class.
This is a first estimate from room volume. Check humidity and moisture readings daily and add or remove units as the job dries.
Suggested capacity
—
Room volume—
Volume in cubic feet—
Rated capacity needed (AHAM pints/day)—

Matching Thorair units

Manufacturer ratings are measured at set temperatures and humidity. On a cool or drier job, real extraction is lower, so round up.

How the calculation works

The calculator uses the common chart method: work out the room volume in cubic feet, then divide by a factor for the class of water loss. The answer is the rated dehumidifier capacity in pints per day, which is converted to litres (1 US pint = 0.473 L).

The factors (100, 50, 40 and 50 for Class 1 to 4) are the widely used starting points for LGR dehumidifiers. Wetter jobs need more capacity per cubic metre. After day one, your psychrometric readings tell you whether to add a unit or pull one out.

Read more in what size dehumidifier do I need, or compare the units in the dehumidifier comparison.

Talk to Thorair

Not sure which unit fits the job?

Call the Thorair team for sizing advice, bulk and fleet pricing, or finance. Orders placed before 2pm AEST ship the same day.

Call 1300 263 551 Shop