Skip to content
Same-day dispatch on orders before 2pm AEST · Australia-wide
Mon–Thu 8–4 · Fri 8–3 info@thorair.com.au 1300 263 551
Calculator

How many air movers do I need?

A first count of air movers from the wet floor, wet walls and insets, plus a check that the blowers will not overload your circuits.

Carpet, underlay or hard floor that is wet.
Total run of wall with wet plaster board or skirting.
Wardrobes, alcoves, bathrooms or nooks that need their own blower.
Starting count
—
For the floor (1 per 10–16 m²)—
For the walls (1 per 3–5 m)—
For insets and offsets—

Units per circuit (80% load)

Rules of thumb only. Set blowers at 15–45° to the wall, keep them moving as areas dry, and balance them with enough dehumidification.

How it works

The count adds three common rules of thumb: one air mover for every 10–16 m² of wet floor, one for every 3–5 metres of wet wall, and one for each inset or offset. The result is a range; start near the top for dense or saturated materials. The air movers per room guide covers placement, and air mover types explains which blower suits which job.

Talk to Thorair

Not sure which unit fits the job?

Call the Thorair team for sizing advice, bulk and fleet pricing, or finance. Orders placed before 2pm AEST ship the same day.

Call 1300 263 551 Shop