Sydney is big enough that a restorer in the eastern suburbs and one in the Hawkesbury are effectively in different trades. Humidity is moderate to high through summer and autumn, the city gets heavy east-coast rain events, and much of the older housing was built without modern damp-proofing. Below are the four job types that come up most.
1. Sandstone basements and garages
Harbourside and eastern suburbs homes, along with plenty of older commercial buildings, have basements and lower levels cut into or built from sandstone. Sandstone is porous. Groundwater and rain seep through it, and a basement that is damp most of the year becomes wet after a big storm.
Drying a basement is different from drying a flooded lounge room. The source often cannot be stopped completely, air movement is poor, and the space is cool. A continuous-drain LGR dehumidifier running on a hose to a floor waste is the practical answer; the 7.5 m dehumidifier hose helps when the drain is across the room. Treat any visible mould before it spreads into stored goods and joinery.
2. Terraces and older brick homes
Victorian and Federation terraces in Paddington, Surry Hills, Newtown, Glebe and Balmain share walls, have limited cross-ventilation and often suffer rising damp at the base of walls. Their narrow halls and steep stairs also make heavy equipment awkward. Lighter units help: the 50L LGR dehumidifier is 35 kg on wheels with a retractable handle, and a Pro Square blower is 13 kg.
Rising damp is a building problem, not a drying one. A dehumidifier will lower room humidity and help with condensation and mould, but the wall needs its damp course fixed to stop the moisture coming back.
3. Strata leaks
Apartment towers across the city generate a steady stream of bathroom, balcony and burst-hose leaks, frequently affecting two or three units at once. Each unit needs its own drying plan and moisture log, which matters when strata managers and insurers want records. Good documentation starts with a moisture meter and thermal camera; see thermal cameras and moisture meters.
4. Western Sydney and Hawkesbury-Nepean flooding
The Hawkesbury-Nepean valley floods more severely than most of Sydney because the river narrows downstream, backing water up across the floodplain. Major floods hit Windsor, Richmond, North Richmond and surrounding areas in March 2021 and again more than once during 2022. Suburbs along Georges River, Parramatta River and local creeks also flood in large storms.
Flood jobs need the heavy end of the range: 90L LGR dehumidifiers, several air movers per room, and air scrubbers once mouldy or contaminated linings are being stripped. Floodwater is Category 3, so wear appropriate PPE, remove affected porous materials, and bring in a qualified professional for large or sewage-affected sites. The flood recovery page covers the sequence.
Containment and air quality
Mould remediation in Sydney's older housing stock often means working in occupied homes. Setting up a Hulk scrubber with flexible duct to exhaust air out of a sealed work area keeps spores away from the rest of the house. The Hulk 16" duct attachment and 7.5 m PVC negative-pressure duct are made for this.
Timing orders from Sydney
Thorair ships from Currumbin Waters, Queensland. The same-day dispatch cut-off is 2:00pm AEST. Because Queensland does not observe daylight saving, during New South Wales daylight saving (October to April) that cut-off is 3:00pm Sydney time. Later orders dispatch the next business day.
All units are SAA certified, with a 365-day full replacement warranty and an extended second-year replacement warranty on parts. For multi-unit fleet orders, call 1300 263 551 about bulk pricing.
