Brisbane sits in a humid subtropical climate. Most of the year's rain falls between December and March, often in heavy storm bursts, and outdoor humidity through summer regularly sits high enough that a flooded room will not dry on open windows alone. Winters are mild and drier, which is why many local restorers find their heaviest drying work bunched into the storm season.
Why Brisbane jobs are different
River and creek flooding
The Brisbane River flooded in January 2011 and again in February 2022, and both events reached homes and businesses in low-lying suburbs such as Rocklea, Oxley, Chelmer, Graceville and parts of Milton. Local creeks and the Bremer River around Ipswich also rise quickly in heavy rain. Floodwater is Category 3 water: it carries silt, sewage and chemicals. Contaminated materials need to come out, workers need proper PPE, and large or heavily contaminated jobs belong with a qualified restoration professional. Our flood recovery guide covers the order of work.
Queenslanders and the space underneath
The classic timber Queenslander on stumps is common in inner and middle-ring suburbs. Many have had the underneath built in and turned into living space, often with a slab poured under the original house. When water gets in, it soaks into the slab, the lower wall linings and the timber framing above, and the enclosed space traps moisture. Unenclosed subfloors dry more easily but can hold damp soil and poor airflow for weeks after rain, which feeds mould on bearers and joists.
Storm damage and roof leaks
Summer hailstorms and severe thunderstorms bring a steady run of roof, ceiling and wall-cavity leaks. These are usually Category 1 or 2 water, but the moisture hides in plasterboard, insulation and wall cavities, so a moisture meter and thermal camera are as important as the drying kit itself.
Equipment that suits Brisbane work
In a humid city, the dehumidifier does the heavy lifting. Air movers push moisture out of carpets and walls into the air; if the air cannot hold more, drying stalls. That is why low grain refrigerant (LGR) units are the default choice here: they keep pulling water when the room air has already been dried down, where a basic refrigerant unit tails off. See LGR vs refrigerant vs desiccant dehumidifiers for the detail.
- Built-in Queenslander lower levels and slab homes: a 70L or 90L LGR dehumidifier per affected zone, with a Snail blower or two per room aimed along wet wall bases.
- Upstairs ceiling leaks: a 50L LGR dehumidifier and a low-profile blower is often enough for a bedroom-sized area.
- Mould and post-flood strip-outs: a Hulk 1000 CFM air scrubber with H13 HEPA filtration, run as a negative air machine with ducting where containment is needed.
- Detection: a FLIR MR277 or Protimeter SurveyMaster to map wet framing and confirm dry standards.
A common starting point for air movers is one per 4–5 metres of wet wall plus extra for wet carpet, but treat that as a rule of thumb. Use the air mover calculator for a first estimate and let moisture readings, not the calendar, decide when to pull equipment.
Ordering from Currumbin Waters
Thorair's warehouse is at Currumbin Waters on the southern Gold Coast, just down the M1 from Brisbane. Orders placed before 2:00pm AEST are dispatched the same business day; later orders go out the next business day. Queensland does not use daylight saving, so that cut-off stays at 2:00pm Brisbane time all year.
Every unit is SAA certified and carries Thorair's 365-day full replacement warranty, plus an extended second-year replacement warranty on parts. You do not need an ABN to buy, and bulk pricing is available on larger orders. If you are building a fleet before storm season, finance is available through our partner Emu Money, subject to approval.
Call 1300 263 551 to talk through a job, check stock or arrange a bulk order.
